Canon Ir3225 Error Code List

Posted : admin On 12/1/2021

Canon Pixma TS3100 Series Printer Error Codes:

Canon Pixma TS3100 Series Printer Error Codes

View and Download Canon IR3245 troubleshooting manual online. IR3245 all in one printer pdf manual download. Also for: Ir3230, Ir3235, Ir3225, Ir3245n, Ir3225n, Ir3235n. Operating at up to 25 pages per minute (letter), the imageRUNNER 3225 is a highly configurable, compact MFP offering standard network print and color scan, as well as a large selection of options for small offices and workgroups. This manual, Canon iR3245 iR3235 iR3230 iR3225, is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Canon iR3245 iR3235 iR3230 iR3225 copier. You can print, zoom or read any diagram, picture or page from this Service Manual.

Canon Ir3225 Error Code List
Error CodeSolution
E02Printer is out of paper. Printing one side is complete if you are performing manual duplex printing.
E03The cover is open. Paper is jammed.
E04FINE cartridge is not installed properly.
E05FINE cartridge cannot be recognized.
E08Ink absorber is almost full.
E09Protective material or tape may still be attached to FINE cartridge holder.
E11Cannot perform printing with current print settings.
E12Specified data cannot be printed.
E13The ink may have run out.
E14FINE cartridge cannot be recognized.
E15FINE cartridge cannot be recognized.
E16The ink has run out.
E23IP address and subnet mask are conflicting.
E31Failed in wireless LAN setup.
E32Cannot find a wireless router during setup.
E33Cannot connect because multiple wireless routers are connecting to the printer.
E34Easy wireless connect has failed.
E36Easy wireless connect has failed.
E37Failed in wireless LAN setup.
E38Cannot connect to a wireless router. Cannot change the LAN settings.
E39Network error has occurred.
E45Cannot connect to network.
E46Cannot connect to network.
E47Cannot connect to server.
E48Cannot connect to server.
E49Failed in connecting to Internet because network connection is being prepared.
E50Failed in acquiring contents.
E51Cannot connect to server.
E52Failed in registering the printer to Google Cloud Print due to timeout.
E53Only information registered to the printer is deleted because of failing to connect Google Cloud Print.
E54Only information registered to the printer is deleted because of failing to connect IJ Cloud Printing Center.
E55The printer is already registered to IJ Cloud Printing Center.
E56The online service is not available in your region.
E57Scanning print head alignment sheet failed.
E58Trying to start copying before you register the paper size.
E59Paper settings for printing do not match paper information set on printer.
E61Scanning original has failed.
E62Unexpected error occurred while scanning is in progress.
E63Reached the upper limit of pages which can be saved.
E64Scanning original has failed.
E65Saving scanned data failed because the printer’s memory is full.
P02Printer error has occurred.
P07Printer error has occurred.
P10Printer error has occurred.
P03, P08, P09, P20, P22, P26, P27, P28, P29Printer error has occurred.

Canon MF6140dn, MF6180dw Series Printer Error Codes:

Canon MF6140dn, MF6180dw Series Printer Error Codes

Error CodeSolution
001A document jams in the feeder.
003A fax could not be sent or received due to its large data size.
005A fax could not be sent because the recipient’s machine did not respond within the time limit.
012A fax could not be sent because the recipient's machine ran out of paper.
018A fax could not be sent since the recipient's machine did not respond because the line was busy or for other reasons.
0221. Sending of a fax from a computer is disabled. 2. A fax could not be forwarded because the specified destination was deleted from the Address Book.
037The machine memory is full.
099Printing, sending, or receiving was canceled.
401A scanned document could not be stored to a USB memory device due to insufficient memory space.
404Tried to save a document to USB memory, but writing to the USB memory is restricted.
406A scanned document could not be stored to a USB memory device due to an error.
4081. USB memory was disconnected while being read from, and reading failed. 2. An error occurs when reading or accessing images on USB memory, and images cannot be read normally. 3. The connected USB memory is formatted with an unsupported file system.
7011. Authentication failed because an incorrect Department ID or PIN was entered when the Department ID Management was activated. 2. Continuing operating without entering a Department ID was attempted even though unknown-ID jobs were disabled.
703Data could not be written because the memory space that was allocated for images was full when sending an e-mail or storing to a shared folder.
7521. An e-mail could not be sent because an incorrect SMTP server name was set. 2. An e-mail could not be sent because an incorrect domain name was set. 3. An e-mail could not be sent because the machine was not connected to a network correctly.
753Scanned data could not be e-mailed or stored to the shared folder due to a TCP/IP error (such as a Socket or Select error).
7551. Scanned data could not be e-mailed or stored to the shared folder because TCP/IP was not working correctly. 2. An IP address is not set. 3. The machine cannot communicate with devices on a network immediately after the machine starts up because the waiting time for the start of the communication is set.
8011. When communicating with an SMTP server to send an e-mail, a timeout error occurred from the server. 2. When communicating to the SMTP server, an error returned from the server. 3. A destination is not set correctly. 4. When storing a scanned document into the shared folder, an error occurred from the folder.
802The SMTP server name is not set correctly.
804No access privileges to access the shared folder are granted.
8061. When storing data to a shared folder, an incorrect user name or password was specified. 2. When sending an e-mail, an incorrect destination was specified.
810When communicating to the POP server to send an e-mail, an error returned from the server.
812The password that is used for POP authentication is not set correctly.
813The logon name that is used for POP authentication is not set correctly.
822An image file in a USB memory device could not be printed because the format of the image file is not supported.
839A user name and password that are used for SMTP authentication are not set correctly.
841When sending an e-mail, an encryption algorithm that is common to the mail server is not present.
8441. SSL encrypted communication to a POP server failed when sending an e-mail with POP before SMTP. 2. When verifying an SSL server certificate to communicate to the POP server, a verification error occurred.
846An e-mail could not be sent due to a POP authentication failure.
852The machine turns OFF for some reason.
8531. A document could not be printed because its data size exceeded the machine's upper processing capability. 2. Printing was canceled from the computer.
8611. A document could not be printed because a printer driver that was not intended for this machine was used. 2. A document could not be printed due to a defect in its data.
863An error occurred when printing from a computer.
995A document waiting to be sent was canceled.

Canon Printer Support Code List

The support code appears on the touch screen and the computer screen when an error occurs. ‘Support Code’ means the error number and appears with an error message. When an error occurs, check the support code displayed on the touch screen or the computer screen and take the appropriate action.

Support CodeMeaning
1300Paper is jammed inside the front cover.
1303Paper is jammed inside the rear cover.
1313The paper is jammed inside the rear cover as the machine pulled in the printed paper.
1314Paper is jammed inside the rear cover when performing automatic duplex printing.
2801The document is jammed in the ADF
1007Possible causes include the following. 1. There is no paper in the cassette 1. 2. Paper is not loaded in the cassette 1 properly.
1008Possible causes include the following. 1. There is no paper in the cassette 2. 2. Paper is not loaded in the cassette 2 properly.
1200The front cover is open.
1310The size of paper may not be compatible with automatic duplex printing.
1575Ink cannot be correctly detected.
1600Ink may have run out.
1660The ink tank is not installed.
1688The ink has run out.
1700The ink absorber is almost full.
1701The ink absorber is almost full.
1754The ink tank is not installed properly.
1755The ink has run out.
1872The cassette 1 is not inserted.
1873The cassette 2 is not inserted.
1874The cassette 1 and the cassette 2 are not inserted.
1890The protective material for the print heas holder or the table may remain attached to the holder.
2001The device incompatible with the machine is connected.
2002An unsupported USB hub is connected.
2111The paper setting for printing or copying are different from the cassette paper information registered to the machine.
2112The paper setting for printing or copying are different from the cassette paper information registered to the machine.
2113The paper settings for printing or copying are different from the cassette paper information registered to the machine.
2121The paper setting of the cassette 1 is not complete.
2122The paper settings of the cassette 2 is not complete.
2500The cause of following may have occurred the failure of automatic print head alignment.
2700Possible causes include the following. Some errors occured while copying and a certain time passed. Document is remained in the ADF. Some errors occurred while scanning and the document is remained in the ADF.
2802No document in the ADF.
2803The document is too long or is jammed in the ADF.
4100The specified data cannot be printed.
4103Cannot perform printing with the current print setting.
4104The paper size or the media type that cannot be fed from the cassette 2 is specified.
5011Printer error has occurred.
5012Printer error has occurred.
5040Printer error has occurred.
5100Printer error has occurred.
5102Printer error has occurred.
5103Printer error has occurred.
5104Printer error has occurred.
5105Printer error has occurred.
5200Printer error has occurred.
5203Printer error has occurred.
5204Printer error has occurred.
5205Printer error has occurred.
5206Printer error has occurred.
5207Printer error has occurred.
5208Printer error has occurred.
5209Printer error has occurred.
5400Printer error has occurred.
5500Ink tank has not been properly recognized.
5501Ink tank has not been properly recognized.
5B00Printer has occurred.
B202 An error requiring you to contact the service center has occurred.
B203An error requiring you to contact the service center has occurred.
B204An error requiring you to contact the service center has occurred.
B502Printer has occurred.
B503Printer has occurred.
B504Printer has occurred.
C000Printer has occurred.

5B01 , 5C01, 6000, 6500, 6502, 6800, 6801, 6900, 6901, 6902, 6910, 6911, 6920, 6921, 6930, 6931, 6932, 6933, 6936, 6937, 6938, 6939, 693A, 6940, 6941, 6942, 6943, 6944, 6945, 6946, 7100, 7200, 7201, 7202, 7203, 7204, 7205, 7300, 9000, 9500: Printer has occurred

Canon imageRUNNER 6000 Printer Error Codes:

Error CodesMeaning
E000 fixing overheating
E001 fixing assembly overheating
E002 fixing assembly low temperature
E003post-standby fixing low temperature
E007fixing film rotation error
E010main motor rotation error
E014fixing motor rotation error
E019waste toner case full, waste toner case full sensor error
E020toner clogging between sub hopper and developing assembly
E024 developing assembly connector disconnection
E025hopper motor, bottle motor error
E032 NE controller counter error
E064 power supply voltage error (high-voltage)
E100 BD interval error
E110 scanner motor error
E191communication error for high voltage power supply
E202 CIS home position detection error
E225CIS light intensity error
E227 reader unit power supply error
E248 backup memory error
E261 zero-cross signal error
E315 image data error
E400 feeder communication error
E490wrong DF type
E500finisher communication error
E503finisher internal communication error
E505finisher backup memory error
E514stack delivery/trailing edge assist motor error
E519gear change motor error
E520off-set motor error
E530rear alignment error
E531stapling error
E532stapler shift error
E535swing error
E537front alignment error
E540stack tray ascent error/upper tray ascent error
E542lower tray ascent error
E577paddle error
E584shutter error
E590punching error
E591puncher dust sensor error
E592punch horizontal registration sensor error
E593punch shift error
E5F0saddle paper positioning error
E5F1saddle paper folding error
E5F2saddle guide error
E5F3saddle alignment error
E5F4saddle rear stapling error
E5F5saddle front stapling error
E5F6saddle butting error
E5F8saddle connector error
E5F9saddle switch error
E602hard disk error
E604image memory error/shortage
E609hard disk error
E610hard disk coding key fault
E674fax board communication error
E710IPC initialization error
E711IPC communication error
E716communication error for pedestal/ communication error for 3-way unitA1
E717communication error for NE controller
E719coin vendor error
E730PDL software error
E732scanner communication error
E733printer communication error
E740ether board error
E743DDI communication error
E744language file/boot ROM error
E745TokenRing board error
E746accessories board wrong model error
E748controller board and SDRAM size mismatch
E805fan error

Errors and warnings are displayed by the following ways:

– Operator call errors are indicated by the Alarm LED lit in orange, and the error and its solution are displayed on the LCD.
– Messages during printing from a computer are displayed on the MP driver Status Monitor.
– Error codes are printed in the “operator call/service call error record” area in EEPROM information print.

Buttons valid when an operator call error occurs:

– ON button: To turn the machine off and on again.
– OK button: To clear and recover from an error. In some operator call errors, the error will automatically be cleared when the cause of the error is eliminated, and pressing the OK button may not be necessary.
– Stop button: To cancel the job at error occurrence, and to clear the error.

Operator Call Error (Alarm LED Lit In Orange)

ErrorError code7-segment LCDSolution
No paper in the rear tray.[1000]E02Set the paper in the rear tray, and press the OK button.
Paper jam.[1300]E03Remove the jammed paper, and press the OK button.
Paper output tray open.[1251]E03There may be an obstacle in front of the machine. Remove it, if any, and press the OK button.
Ink cartridge not installed, or not properly installed.[1401]E05Install the ink cartridge properly. If the error is not cleared, the ink cartridge may be defective. Replace the ink cartridge.
Ink cartridge temperature sensor error.[1403]E05Re-set the ink cartridge. If the error is not cleared, the ink cartridge may be defective. Replace the ink cartridge.
Non-supported ink cartridge is installed.[1485]E05A non-supported ink cartridge is installed. Install the supported ink cartridge. If the error is not cleared, the ink cartridge may be defective. Replace the ink cartridge.
Ink cartridge in a wrong position.[1486]E07Install the ink cartridge in the correct position. If the error is not cleared, the ink cartridge may be defective. Replace the ink cartridge.
Multiple ink cartridges of the same color installed.[1487]E07Confirm that each ink cartridge is installed in the correct position. If the error is not cleared, the ink cartridge may be defective. Replace the ink cartridge.
Ink cartridge hardware error[1682]E15Re-set the ink cartridge. If the error is not cleared, the ink cartridge may be defective. Replace the ink cartridge.
Ink cartridge not recognized.[1684]E14A non-supported ink cartridge is installed. Install the supported ink cartridge.
The remaining ink amount unknown.[1686]E13Replace the ink cartridge. Printing with an empty ink tank can damage the machine. To continue printing without replacing the ink cartridge, press the Stop/Reset button for 5 sec. or longer. (After the operation, it is recorded in the machine EEPROM that the function to detect the remaining ink amount was disabled.)
Ink cartridge not completely installed.[1687]E04Re-set the ink cartridge. If the error is not cleared, the ink cartridge may be defective. Replace the ink cartridge.
No ink.[1688]E16Replace the ink cartridge. Printing with an empty ink tank can damage the machine. To continue printing without replacing the ink cartridge, press the Stop/Reset button for 5 sec. or longer. (After the operation, it is recorded in the machine EEPROM that the function to detect the remaining ink amount was disabled.)
Warning: The ink absorber becomes almost full.[1700]E08Replace the ink absorber, and reset the ink absorber counter. Pressing the Stop/Reset button will exit the error, and enable printing without replacing the ink absorber. However, when the ink absorber becomes full, no further printing can be performed unless the applicable ink absorber is replaced.

Service Call Error (Cyclic Blinking in Orange (Alarm LED) and Green (ON LED)

Cycles of blinking in orange and greenErrorError code7-seg. LCDConditionsSolution (Replacement of listed parts, which are likely to be faulty)
2 timesCarriage error[5100]P02An error occurred in the carriage encoder signal.1) Confirm that no foreign material is in the area where the carriage moves.
2) Clean the timing slit film. If it cannot be cleaned, replace it.
3) Replace the following items (listed in the order of likeliness to be faulty):
– Carriage unit
– Logic board
3 timesLine feed error[6000]P03An error occurred in the LF encoder signal.1) Perform the following for the timing slit disk film:
– Clean it.
– Re-attach it, if peeled off.
– Replace it, if it cannot be cleaned, or if it is deformed or damaged.
2) Replace the following items (listed in the order of likeliness to be faulty):
– Logic board
– Drive unit
5 timesASF cam sensor error[5700]P05This error takes place when feeding paper from the rear tray after an error occurred in the rear tray cam sensor.1) Confirm that no foreign material is around the drive gear on the side of the drive unit.
2) Replace the following items (listed in the order of likeliness to be faulty):
– Drive unit
– Logic board
6 timesInternal temperature error[5400]P06The internal temperature is not normal.Replace the logic board.
7 timesInk absorber fullJapan:
[5B00]
Others:
[5B01]
P07The ink absorber becomes full.Replace the ink absorber (ink absorber kit), and reset the ink absorber counter.
8 timesPrint head temperature rise error[5200]P08The print head temperature exceeded the specified value.Replace the following items (listed in the order of likeliness to be faulty):
– Ink cartridge
– Logic board
9 timesEEPROM error[6800]
[6801]
P09A problem occurred in reading from or writing to the EEPROM.Replace the logic board.
10 timesVH monitor error[B200]P10The print head voltage is abnormal.Replace the following items:
– Ink cartridge
– Logic board
20 timesOther hardware error[6500]P20An unidentified error or a network error occurred.Replace the following item (listed in the order of likeliness to be faulty):
– Logic board
– WLAN board
22 timesScanner error[5011]P22The scanner unit is faulty.Replace the following items (listed in the order of likeliness to be faulty):
– Scanner unit
– Logic board
23 timeScanner motor error[5012]P22The scanner motor is faulty.Replace the following items (listed in the order of likeliness to be faulty):
– Scanner unit
– Logic board

Canon Ir3225 Error Code Listing

Other Error

Canon Ir3225 Brochure

7-segment LCDCauseSolution
E20The wireless LAN setting was attempted while other settings were being performed.Wait until the settings being performed were completed, then try the wireless LAN setting.
E23In WPS wireless LAN setting, multiple access points were detected.Wait for a while, and perform the setting again.
E24In WPS wireless LAN setting, an error occurred.Confirm the access point, and perform the setting again.
E50The machine failed in scanning the print head alignment sheet.Press the Stop/Reset button to clear the error, perform the following, then try the print head alignment again:
– Confirm that the sheet is placed in the correct orientation.
– Clean the platen glass, if it is smeared.
– Confirm that A4 plain paper is used.
– Print the nozzle check pattern to confirm that all the ink is ejected properly.